Linear multichannel InGaAs image sensors for the 900-2500nm spectral range

Linear multichannel InGaAs image sensors for the 900-2500nm spectral range

G9204-512DA Hamamatsu

G9202-512SB Hamamatsu

G9212-512SB Hamamatsu

G11478-256WB Hamamatsu

Number of pixels

512

512

512

256

Defective pixels 1)

No

No

≤5

≤13

Pixel size, μm2

25×500

25×250

25×250

50×250

Effective photosensitive area length, mm

12.8

12.8

12.8

12.8

Spectral response range, μm

0.9-1.67

0.9-1.67

0.9-1.67

0.9-2.55

Peak sensitivity wavelength, μm

1.55

1.55

1.55

2.3

Photo response non-uniformity, not less, % 2)

±5

±5

±5

±10

Anti-blooming3)

Yes

Yes

Yes

Yes

ADC Resolution

16

16

16

16

Readout noise, ADC count, rms

<4

<4

<4

<6

Data rate (max), kHz

125

125

125

125

Min.frame readout time, ms

4.1

4.1

4.1

2.05

Exposure time step, μs

16

16

16

16

Min.exposure time, μs

12

12

12

8

Max.exposure time, not less, s 4) 5)

100

100

100

3.5 ms

Cooling temperature, °С

Non-cooled

-10

-10

-20

Operating temperature, °С

10-30

10-30

10-30

10-30

Interface

High-Speed USB

High-Speed USB

High-Speed USB

High-Speed USB

Synchronization

IN/OUT

IN/OUT

IN/OUT

IN/OUT

Size, mm3

66×86×32

70×80×122

70×80×122

70×80×143

1)     Total number of pixels with dark current, sensitivity nonlinearity and readout noise exceeding maximum value. The first and last pixels are not counted.

2)     Signal level is 50% of saturation. Exposure time is 10ms.

3)     Anti-blooming: the ability to prevent the spilling of excess photocharges from a saturated photoelement to neighboring elements.

4)    Max.exposure time is a time for which dark signal reaches 25% of the dynamic range.

5)     All image sensors provide two operational modes: high dynamic or high sensitivity. Parameters in the above table are indicated fir the high dynamic modes.



If you have any questions, ask us!

Our specialists will help you, provide a free consultation or make an appointment